升降平台http://www.sjpt178.com/采用高强度锰钢钜形管制作，设有防止升降机超载的安全保护装置，设有防止液压管路破裂的安全保护阀，设有停电情况下的应急下降装置，在平台长度不足时可延伸至所需位置，从而提高工作效率。下面济南悦翔机械制造的专家给大家详细分析一下升降平台重要部件如何保养？

1、升降平台都是由动力单元和油缸控制的，动力单元在生产时设有四个出孔，可调节大小，同时通过调整马达速度或电液比例阀来调整液压油的流量大小，油缸尺寸，在满足设计要求的情况下，尽可能的减小油缸尺寸。油缸尺寸越小，上升速度越快，一次性运送货物的量不能过重，在达到升降平台运送货物的最佳值时就可以了，这样才能保障升降平台的速度正常运行。
Lifting platform is controlled by the power unit and the oil cylinder, power unit in the production is provided with four out of the hole, can adjust the size, at the same time through adjust motor speed or electro-hydraulic proportional valve to adjust the flow quantity of the hydraulic oil, cylinder size, to meet the design requirements, as far as possible to reduce cylinder size. The smaller the size of the cylinder, rising faster, one-time delivery of goods the quantity can not be too heavy, reached the lifting platform for the carriage of the goods to the optimal values can, so as to guarantee the speed and normal operation of the lifting platform.

2、升降平台各机构的制动器应经常进行检查和调整制动瓦和制动轮的间隙，保证灵活可靠。在摩擦面上，不应有污物存在，遇有污物必须用汽油或稀料洗掉，减速箱、变速箱、外啮合齿轮等各部分的润滑以及液压油均按润滑表中的要求进行。经常检查升降平台所有的电线、电缆有无损伤，要及时的包扎和更换以损伤的部分。
The brake of the lifting platform should always check and adjust the clearance between the brake pad and the brake wheel to ensure the flexibility and reliability. On the friction surface, there should be no dirt. In case of pollutants must be gasoline or thinner wash, gear box, gear box, external meshing gear lubrication and hydraulic oil were carried out according to the lubrication chart. Often check the lifting platform all the wires, cables, there is no damage, to timely dress up and replace the damaged part.

3、升降平台http://www.sjpt178.com/系统在常压常温下液压油中含有容积比为6~8%的空气，当压力降低时空气会从油中游离出来，气泡破裂使液压元件"气蚀"，产生噪声，合理使用和维护升降平台，既能提高生产效率，也可以节约成本，在日常的使用过程中我们要格外注意升降平台的保养和维护。
System of the lifting platform under the normal temperature and pressure, hydraulic oil containing volume than for 6 ~ 8% of the air, when the pressure is reduced temporal gas will from the oil free bubble burst, so that the hydraulic components "cavitation", produce noise, reasonable use and maintenance of the lifting platform, both to improve production efficiency, also can save the cost, in the daily use process we should pay particular attention to the maintenance of the lifting platform and maintenance.